Where is installation diskette

This side of the cable points to the power connection. If your computer floppy cable has three connections or a twist in the cable, verified it's connected correctly by referring to the picture below. Today, most computers and computer floppy disk drives have cables that only have two connections: one for the motherboard and one for the floppy disk drive. If your cable only has two connections, the above picture does not apply.

After connecting the floppy interface cable, connect the drive power cable to the back of the floppy disk drive. This cable is relatively small, compared to the majority of power cables coming from the power supply. Once the floppy drive is fully connected to the computer, put the case back on the computer.

Then, connect the keyboard, monitor, and power to the computer. We recommend you do not reconnect the rest of your cables yet. If you experience problems, you may have to disconnect all the cables again. Fix problems with common system maintenance tasks. Windows Update More Need more help? Expand your skills.

Get new features first. Was this information helpful? Yes No. Thank you! Any more feedback? The more you tell us the more we can help. Can you help us improve? Resolved my issue. Clear instructions. Easy to follow. No jargon. Pictures helped. Didn't match my screen. Incorrect instructions.

In the picture below, you can see the SATA power connector on the hard disk and on the power supply. Locate the correct connector from your power supply and plug it into the back of your hard disk. Be extremely careful when plugging it in, as downwards pressure can break the clip surrounding the power connector.

Your motherboard will ship with several SATA cables, so take one of these from the box. Plug it gently into the rear of the hard disk. Be careful when you plug it in, as downwards pressure can break the connector and prevent the SATA cable from connecting properly.